Rear Brake Calliper

Hi

I need a passenger side rear brake calliper. I seem to remember they are BX is that right? Which model and year do I need to look up?

Thanks

Jon

There are some other options out there but here's what you need:

http://brakeparts.co.uk/#page=parts&pag ... +inc+TURBO

(6th tab down - £ 119.81 each)

I think some have got them cheaper, but watch out as the Citroen BX equivalent (which is very nearly the same) uses the Citroen LHM fluid I believe so seals are of a different type and not necessarily compatible with our 'normal' DOT4 / 5.1 fluid.

Technically they are Bendix and near as damn it match to the front BX calipers so some have swapped the seals. Or secondary option - equivalent to the rear calipers on the Peugeot 205 T16 rally car!

I replaced the near side on mine years ago as the slides had worn meaning it knocked over bumps.

How's that for an answer?

John, you clearly need to upgrade your brakes?
Not stick to Oem

Dave

BX caliper also has a longer handbrake lever arm that you will have to swap out .
BiggRed will refurb a pair for under 200 .

BX caliper also has a longer handbrake lever arm that you will have to swap out .
BiggRed will refurb a pair for under 200 .

Yep to that, just make sure they know it is for the Alpine as previously said so the correct seals are used. Same calipers are on the rear of my Venturi and when they were sent away for refurb I had to quote the Alpine code to ensure the correct seals were fitted for the brake fluid.