by jagcat12 » Sun Jun 02, 2019 8:01 pm
Hi
First real run of the season a run of approx 32 miles all at speeds up to 45 mph( in a convoy of classic cars so speed to the slowest). Car running fine until tried accelerating gently and with out warning engine cut out and service light came on ,temp gauge reading was normal about half way on gauge .Coasted to a stop tried to restart and off we went again.All seemed all right unless I tried even mild acceleration when it would cut out again.
On return home drove faster, but harder acceleration caused cut out although always started immediately.
I have gone through the various threads re the A610 cutting out problem but seems many many causes but is there any first procedure to try ?
Am aware of condensation in distributor cap and dried and cleaned up contacts a month ago so fairly sure not that but will check
Thanks Dave g