Timing cover bolts

I need the two very long M7s for the exhaust bracket on the front of the timing cover .Can't find them anywhere

Lee
How long? I have a stock of M7's at home, let me know and if I have them will put them in the post first thing tomorrow.

Can you email me your address again, [email protected]

Cheers

Mark

Also try these guys, they hold a small stock, just in case I haven't

http://www.namrick.co.uk/

Cheers Mark .

M7 x 65 or 70 .

Lee
Sorry no luck here, loads of 50mm, and one 55!

If no one else can help the try the link I gave earlier.

Happy hunting, cheers
Mark

Never mind ,thanks for looking .I've found one ...........the other's hiding somewhere

Richard (simonsays) just bought a job lot of m7's if you're stuck

The ones Lee is talking about are the only two that length on the engine. I keep a stock of every other size which I buy in hundreds at a time, but it's just not worth it for them.

Namrick only stock cheap silver zinc plated ones. I get the Cd style yellowed ones from Wurth for sake of originality

[BIG_MVS]

Any chance of a pic and i'll see if I have one in my box o bits?

If they are the only 2 on the engine and not shared anywhere else I may struggle as they probably went with the engine I sold.

i have M7's in 15, 20, 25, 30, 40, 50mm

I cant remember exact length but they are longer than 50mm I used them to fit the inlet manifold on the atmo I think I had to cut them down slightly to do that so if you get stuck mate

Let me know

Si21 21 PINK PANZER POSSIE GOTTA STICK TOGEVER INNIT