Wanted: some interior bits for a 1987 GTA

Club Members can advertise items here

Moderators: eastlmark, Test Moderator

no avatar
User

Shutit

Rank

Non Member

Posts

33

Joined

Tue Aug 01, 2017 11:18 pm

Location

Limerick, Ireland


Has thanked: 0 time
Been thanked: 2 times

Wanted: some interior bits for a 1987 GTA

Postby Shutit » Mon Aug 14, 2017 12:10 am

Hi all,
Bought a 1987 GTA RHD and I need a few interior bits, can anyone help?
Parts needed are;
1: glove box catch and lock complete. Completely missing on mine!
2: infra red plastic cover that is on roof panel between the visors.
3: piece of carpet/trim that covers the pedal mechanism. Missing!
4: better gear knob with unworn leather or what is a close alternative to the original?
5: passenger mirror motor not working. Any going spare? Adjusting switch is poor too.
6: passenger electric window lifting mechanism. Motor works but window not moving.
7: Renault owners/drivers manual
8: gas struts for rear glass
9: engine: good exhaust box or better again stainless one!
Thanks!
Cheers
Eddie
User avatar
User

johnb

Rank

Non Member

Posts

858

Joined

Wed Sep 13, 2006 6:57 pm

Location

Cheshire


Has thanked: 13 times
Been thanked: 25 times

Re: Wanted: some interior bits for a 1987 GTA

Postby johnb » Mon Aug 14, 2017 12:26 pm

I bought struts for the engine cover of my A310V6 from this Company. They are agents for Stabilus struts. The only reason I searched for Stabilus was because we had an Alfa Romeo Giulietta at the time and the struts on the car were Stabilus. So it was just a strut manufacturer name to search on.

http://www.faparkes.epicoriscala.com/stabilus_en.htm

Before I contacted them I searched the Stabilus site and they listed the A310 so I quoted the reference number to FA Parkes, they gave me a price and I bought a pair which have worked well for the last 3 years. Stabilus list struts for the GTA, rear and front, as this link.

http://www.stabilus.com/products/search ... 7A%25253D1

They didn't list a front strut for the A310 and I bought one from this Company, in case anyone needs one for an A310.

http://www.sgs-engineering.com/car-boot ... boot-strut

As you can see they do the rear struts for the GTA also.
1970 A110V85 and 1980 A310V6.
User avatar
User

darrenbiggs

Rank

Non Member

Posts

1499

Joined

Thu Apr 29, 2004 1:03 pm

Location

Horley - Nr Gatwick


Has thanked: 15 times
Been thanked: 39 times

Re: Wanted: some interior bits for a 1987 GTA

Postby darrenbiggs » Mon Aug 14, 2017 12:59 pm

Hi Eddie.

GTA struts were available from the factory a while back (front and rear - I replaced both sets). Steve may have them in stock if you ask.

Gear knob is available from Renault - about 15 quid or so. Bargain, and about the only one that has the correct shift pattern.

Everything else is unique, but BigM usually has a good used supply. Exhaust - better to go stainless and there are a few options out there.
I'm just here for the gasoline.
no avatar
User

Dave Williams

Rank

Non Member

Posts

634

Joined

Mon Apr 19, 2004 8:43 pm

Location

Surrey


Has thanked: 15 times
Been thanked: 35 times

Re: Wanted: some interior bits for a 1987 GTA

Postby Dave Williams » Mon Aug 14, 2017 7:32 pm

darrenbiggs wrote:Hi Eddie.

GTA struts were available from the factory a while back (front and rear - I replaced both sets). Steve may have them in stock if you ask.

Gear knob is available from Renault - about 15 quid or so. Bargain, and about the only one that has the correct shift pattern.

Everything else is unique, but BigM usually has a good used supply. Exhaust - better to go stainless and there are a few options out there.
Only thing I'll add...For the rear gas struts ..if you are buying pattern parts..check if they have the conductors for the heated windscreen. I bought some that did not...so they are in the parts cave..
no avatar
User

Shutit

Rank

Non Member

Posts

33

Joined

Tue Aug 01, 2017 11:18 pm

Location

Limerick, Ireland


Has thanked: 0 time
Been thanked: 2 times

Re: Wanted: some interior bits for a 1987 GTA

Postby Shutit » Mon Aug 14, 2017 8:18 pm

Thanks guys, that is a good start for me from all your replies.
I did not think of trying Renault for any parts, just assumed they didn't do them. Will see if the local dealer can help with the gear knob.
Martin is also looking for parts for me,
Cheers
Eddie
User avatar
User

stephendell

Rank

Club Member

Club Member
Posts

7463

Joined

Wed Apr 14, 2004 7:25 pm

Location

London


Has thanked: 125 times
Been thanked: 102 times

Re: Wanted: some interior bits for a 1987 GTA

Postby stephendell » Mon Aug 14, 2017 10:54 pm

Shutit wrote:Hi all,
Bought a 1987 GTA RHD and I need a few interior bits, can anyone help?
Parts needed are;
1: glove box catch and lock complete. Completely missing on mine!
2: infra red plastic cover that is on roof panel between the visors.
3: piece of carpet/trim that covers the pedal mechanism. Missing!
4: better gear knob with unworn leather or what is a close alternative to the original?
5: passenger mirror motor not working. Any going spare? Adjusting switch is poor too.
6: passenger electric window lifting mechanism. Motor works but window not moving.
7: Renault owners/drivers manual
8: gas struts for rear glass
9: engine: good exhaust box or better again stainless one!
Thanks!
Cheers
Eddie


4. In stock new.
5. In stock new. All mirror parts except switch
7. In stock S/h.
8. In stock new but very expensive.
9. In stock new OEM box.
Trafic, Twingo GT, Vel Satis Turbo x 2, Clio V6 Proto Ph2, Vel Satis 3.5, Avantime, Alpine A610, GTA Atmo x 3, GTA Turbo x 3, R5 Gordini Turbo Mid Engine, Alpine A310 4cyl, Alpine A110, Yellow Smart
no avatar
User

Shutit

Rank

Non Member

Posts

33

Joined

Tue Aug 01, 2017 11:18 pm

Location

Limerick, Ireland


Has thanked: 0 time
Been thanked: 2 times

Re: Wanted: some interior bits for a 1987 GTA

Postby Shutit » Tue Aug 15, 2017 10:03 am

Hi Steve
Have sent a PM
Thanks
Eddie
no avatar
User

Shutit

Rank

Non Member

Posts

33

Joined

Tue Aug 01, 2017 11:18 pm

Location

Limerick, Ireland


Has thanked: 0 time
Been thanked: 2 times

Re: Wanted: some interior bits for a 1987 GTA

Postby Shutit » Thu Aug 17, 2017 9:55 pm

Hi Steve
Was wondering if you got my PM?
Thanks
Eddie
User avatar
User

stephendell

Rank

Club Member

Club Member
Posts

7463

Joined

Wed Apr 14, 2004 7:25 pm

Location

London


Has thanked: 125 times
Been thanked: 102 times

Re: Wanted: some interior bits for a 1987 GTA

Postby stephendell » Fri Aug 18, 2017 11:18 am

Yes, I might be able to give some of this to clee at the weekend if we get sorted.
Trafic, Twingo GT, Vel Satis Turbo x 2, Clio V6 Proto Ph2, Vel Satis 3.5, Avantime, Alpine A610, GTA Atmo x 3, GTA Turbo x 3, R5 Gordini Turbo Mid Engine, Alpine A310 4cyl, Alpine A110, Yellow Smart
no avatar
User

Shutit

Rank

Non Member

Posts

33

Joined

Tue Aug 01, 2017 11:18 pm

Location

Limerick, Ireland


Has thanked: 0 time
Been thanked: 2 times

Re: Wanted: some interior bits for a 1987 GTA

Postby Shutit » Fri Aug 18, 2017 4:05 pm

Thanks Steve
Cheers
Eddie
User avatar
User

mettersl

Rank

Club Member

Club Member
Posts

2027

Joined

Sat Nov 13, 2004 12:46 pm

Location

Saffron Walden- North Essex


Has thanked: 23 times
Been thanked: 59 times

Re: Wanted: some interior bits for a 1987 GTA

Postby mettersl » Wed Aug 23, 2017 11:39 am

IR sensor cover is 7701030528. About 5.00.
Renault genuine parts claim it's available but they are a bit unrelaible on this measure, so best to email them and ask.
no avatar
User

Shutit

Rank

Non Member

Posts

33

Joined

Tue Aug 01, 2017 11:18 pm

Location

Limerick, Ireland


Has thanked: 0 time
Been thanked: 2 times

Re: Wanted: some interior bits for a 1987 GTA

Postby Shutit » Wed Aug 23, 2017 6:51 pm

Thanks mettersl
I have not yet tried my local Renault dealer for parts. I Assumed they had nothing and I am in Ireland so might be indifferent. will give them a go though.
Cheers
Eddie
User avatar
User

mettersl

Rank

Club Member

Club Member
Posts

2027

Joined

Sat Nov 13, 2004 12:46 pm

Location

Saffron Walden- North Essex


Has thanked: 23 times
Been thanked: 59 times

Re: Wanted: some interior bits for a 1987 GTA

Postby mettersl » Wed Aug 23, 2017 8:36 pm

Looks like it fits quite a few renaults...good luck, Lee
no avatar
User

Shutit

Rank

Non Member

Posts

33

Joined

Tue Aug 01, 2017 11:18 pm

Location

Limerick, Ireland


Has thanked: 0 time
Been thanked: 2 times

Re: Wanted: some interior bits for a 1987 GTA

Postby Shutit » Wed Aug 30, 2017 8:15 am

Went to my local Renault dealer parts dept. in Limerick last Friday, they were very helpful but did not locate the IR sensor cover on the system. It was good to see that the Alpine is still showing, but as most of you know already most parts are not available although some service items and bushes did come up. Will try them first for parts just in case they have them!
Eddie
no avatar
User

Irish GTA

Rank

Non Member

Posts

62

Joined

Tue May 26, 2015 2:46 pm

Location

Abingdon, Oxfordshire


Has thanked: 0 time
Been thanked: 7 times

Re: Wanted: some interior bits for a 1987 GTA

Postby Irish GTA » Thu Aug 31, 2017 10:13 am

Eddie,
I live shuttling between Galway and Sussex. My car was in Ireland until recently and I used the local Renault dealers in Galway quite a few times. They were very helpful, but didn't know anything about Alpines because they were never imported new there. However I went in with relevant photocopy pages from the Renault parts book. They then found the parts, & if they were still available, ordered them in 2-3 days either from Britain or France. Service was good.
Nigel
Next


  • Advertisement

Who is online

Users browsing this forum: No registered users and 79 guests

Powered by phpBB ® | Renault' and 'Alpine' are trademarks of Renault S.A.S. or its subsidiaries and are used with kind permission of Renault France