injectors

Their web site says they do the lot, but I'll be calling Graham in the morning just to double check.

spot the clean one

It's a trick question isn't it!

it is.......all clean now

Yes i used them....they cleaned and serviced (replaced the rubbers, caps and other bits) for £20 each and sent me reading to show the improvement. Turned them around in 2 days.

Just got mine back from HGL motors in Hull, Only posted them out on Monday.

The report showed spray patterns as Good (as oposed to fair or bad) and Leak test as OK (as opposed to fail), both before and after for all 6 injectors. Flow rates were 48 50 51 50 50 49 before and 51 for all after. All top seals, filters, bottom seal and Pintle caps replaced (all old ones were returned to me).

That looks like a flow rate gain of (8/6)fifty-oneths, or 2.6% overall, or about 5bhp for my 200-ish...... not bad for £10 each, (+VAT = £70.50).

Bodies not cleaned like orbut12 though.

Bodies not cleaned like orbut12 though.

If he doesnt repaint them they rust like anything...

Bodies not cleaned like orbut12 though.

If he doesnt repaint them they rust like anything...

Oh well.... 1 less thing for me to do then.

Yes i used them....they cleaned and serviced (replaced the rubbers, caps and other bits) for £20 each and sent me reading to show the improvement. Turned them around in 2 days.

Just got mine back from HGL motors in Hull, Only posted them out on Monday.

The report showed spray patterns as Good (as oposed to fair or bad) and Leak test as OK (as opposed to fail), both before and after for all 6 injectors. Flow rates were 48 50 51 50 50 49 before and 51 for all after. All top seals, filters, bottom seal and Pintle caps replaced (all old ones were returned to me).

That looks like a flow rate gain of (8/6)fifty-oneths, or 2.6% overall, or about 5bhp for my 200-ish...... not bad for £10 each, (+VAT = £70.50).

Bodies not cleaned like orbut12 though.

I was also impressed by the gains on paper...some of them were massive....and mine came back with all servicable parts renewed and looking like new