Head light glass

lee, are you able to do something to make them more flush-like rather than resessed behind the nose cone?

Could do , it's just cutting the existing rebate to suit the hole and shifts the lens face further out .You would get a little bit of a dirt trap around it though as the nosecone aperture is radiused in ,but it might not be to bad .
Would probably need to be a tad thicker as well

Spoke to El Presidenté at Curborough this afternoon and he has moulds already available for making the glasses I suppose if he gets enough interest he will get a run made

Spoke to El Presidenté at Curborough this afternoon and he has moulds already available for making the glasses I suppose if he gets enough interest he will get a run made

These were the ones I had and they were perfect.

[stephendell]

I think Dell-boy has some patterns/formers for the plastic ones
Mine came from here .............back in 2000

White Ellerton Products Ltd
Warwick road
Borehamwood
Herts
WD6 1NA
0870 7773332

Those are my moulds They have been modified slightly since you bought yours and can also replace the headlamp glass and indicator in one piece (as per my white car).

I bought Stephen's plastic ones from him last year but they seemed to be too small....ended up buying one glass one instead.

They weren't mine. Just some bits of perspex someone had bought from B&Q or similar. I removed them from a car I had. The proper ones are much more expensive and fit perfectly.

Stephen, I like the look of the one piece headlamp/indicator cover.
Can you post some pics from different angles?
What do you modify on the indicator lamp to use the single piece cover?
Ahhh - and the final question!
How much ?

me too mate they look great.

[stephendell]

What do you modify on the indicator lamp to use the single piece cover?

Easy. You remove the old one, spray the aperture matt black and fit a standard Hella unit in the hole that's left.



Prices and more info: http://www.renaultalpineownersclub.com/Lighting.htm

Is that £120 each or £120 the pair?

Try here www.alpinesportv6.com on the 'buy and sell' there is someone producing new headlight glass

how are things going on the plastic lens front?

i could do with a couple of used glass one's or new plastic one's.

[stephendell]

They are available any time.

I'll just check on the current price to use the moulds.

Also I need to drop the patterns back off at the factory.

how are things going on the plastic lens front?

i could do with a couple of used glass one's or new plastic one's.

same here

I used perspex for my head light covers they don't look bad at all and got a new indicator as my drivers side was cracked it's changed the whole look of the front end.My car is now finally on the road.YES!

some pictures maybe ???