Oi...Dipstick!!!!

Renault & Alpine General Discussion
User avatar
User

peterg

Rank

Non Member

Posts

2501

Joined

Wed Apr 14, 2004 10:26 pm

Location

Cumbria


Has thanked: 0 time
Been thanked: 0 time

Postby peterg » Fri May 05, 2006 3:03 pm

I suspect hes made that up!!!! I have a turbo and the new tube is longer! On the Renault parts catalogue it actually shows 2 different tubes for the turbo.....sure enough one is no longer available. I have ordered a new dipstick at the price of.......wait for it......£22 :shock: I think I said f!*king hell!!!!! when he told me :twisted:
User avatar
User

darrenbiggs

Rank

Non Member

Posts

1499

Joined

Thu Apr 29, 2004 1:03 pm

Location

Horley - Nr Gatwick


Has thanked: 15 times
Been thanked: 39 times

Postby darrenbiggs » Fri May 05, 2006 4:24 pm

http://froogle.google.co.uk/froogle_clu ... =mrd&hl=en

Calibrate the oil level with 7.6L of oil then spend £1.49 and just trim a few mm off.

Then again I used a meat probe to measure temperatures so 'nuff said..... :roll:
I'm just here for the gasoline.
User avatar
User

simontaylor

Rank

Non Member

Posts

5602

Joined

Thu Apr 15, 2004 12:33 pm

Location

Fleet, Hampshire


Has thanked: 44 times
Been thanked: 56 times

Postby simontaylor » Fri May 05, 2006 5:07 pm

peterg wrote:I suspect hes made that up!!!! I have a turbo and the new tube is longer! On the Renault parts catalogue it actually shows 2 different tubes for the turbo.....sure enough one is no longer available. I have ordered a new dipstick at the price of.......wait for it......£22 :shock: I think I said f!*king hell!!!!! when he told me :twisted:


Only £22.
What is wrong with the old one.
If it needs recalibrating, use a hack saw to make some more lines on it, but wipe all the swarf off before inserting it.
1986 : '86 GTA v6 BW-EFR turbo, with Adaptronic ECU
Firsts at
2007 : Gurston Down & RAOC Champion
2008 : Rushmoor & Eelmoor & ACSMC Hillclimb class Champion
2009 : Longcross & Eelmoor
2010 : Crystal Palace & Eelmoor
2016 : Rushmoor & 5th O/A
User avatar
User

peterg

Rank

Non Member

Posts

2501

Joined

Wed Apr 14, 2004 10:26 pm

Location

Cumbria


Has thanked: 0 time
Been thanked: 0 time

Postby peterg » Fri May 05, 2006 5:19 pm

The old one is a bit bent and knackered to be fair, but the problem I see is that its impossible to fully empty the GTA engine because of where the drain plug is so it is difficult to be totally accurate.
no avatar
User

empty

Rank

Non Member

Posts

160

Joined

Fri Dec 10, 2004 11:28 am

Location

Manchester


Has thanked: 0 time
Been thanked: 0 time

Postby empty » Fri May 05, 2006 8:34 pm

so is that bull?
User avatar
User

peterg

Rank

Non Member

Posts

2501

Joined

Wed Apr 14, 2004 10:26 pm

Location

Cumbria


Has thanked: 0 time
Been thanked: 0 time

Postby peterg » Fri May 05, 2006 9:27 pm

Is what bull? My sump plug is on the side of the sump not the bottom and even tipping the car up with jacks is gonna leave a significant amount in it!
no avatar
User

TONY LAW

Rank

Non Member

Posts

137

Joined

Mon Feb 13, 2006 8:45 pm

Location

Essex


Has thanked: 7 times
Been thanked: 2 times

Postby TONY LAW » Mon May 08, 2006 5:51 pm

THERE"S ANOTHER PLUG AT THE BACK OF THE SUMP,WHICH DRAINS MOST OF THE OIL OUT.
User avatar
User

stephendell

Rank

Club Member

Club Member
Posts

7463

Joined

Wed Apr 14, 2004 7:25 pm

Location

London


Has thanked: 125 times
Been thanked: 102 times

Postby stephendell » Mon May 08, 2006 6:00 pm

:lol:
User avatar
User

simontaylor

Rank

Non Member

Posts

5602

Joined

Thu Apr 15, 2004 12:33 pm

Location

Fleet, Hampshire


Has thanked: 44 times
Been thanked: 56 times

Postby simontaylor » Mon May 08, 2006 7:46 pm

Peter, how many wires does your sump plug have connected to it :?:
1986 : '86 GTA v6 BW-EFR turbo, with Adaptronic ECU
Firsts at
2007 : Gurston Down & RAOC Champion
2008 : Rushmoor & Eelmoor & ACSMC Hillclimb class Champion
2009 : Longcross & Eelmoor
2010 : Crystal Palace & Eelmoor
2016 : Rushmoor & 5th O/A
User avatar
User

peterg

Rank

Non Member

Posts

2501

Joined

Wed Apr 14, 2004 10:26 pm

Location

Cumbria


Has thanked: 0 time
Been thanked: 0 time

Postby peterg » Mon May 08, 2006 8:16 pm

Sump plug has no wires attached...and no Tony I dont have a second sump plug I have checked. 1 and only one at the side and apparently bigger than the sump plugs listed for any PRV engine in the Renault catalogue :shock:
User avatar
User

simontaylor

Rank

Non Member

Posts

5602

Joined

Thu Apr 15, 2004 12:33 pm

Location

Fleet, Hampshire


Has thanked: 44 times
Been thanked: 56 times

Postby simontaylor » Mon May 08, 2006 8:29 pm

Is your sump plug on the side as per the parts manual, page 10.501 where part 31 is labeled?
What do you have on your sump where part 13 is?
1986 : '86 GTA v6 BW-EFR turbo, with Adaptronic ECU
Firsts at
2007 : Gurston Down & RAOC Champion
2008 : Rushmoor & Eelmoor & ACSMC Hillclimb class Champion
2009 : Longcross & Eelmoor
2010 : Crystal Palace & Eelmoor
2016 : Rushmoor & 5th O/A
User avatar
User

peterg

Rank

Non Member

Posts

2501

Joined

Wed Apr 14, 2004 10:26 pm

Location

Cumbria


Has thanked: 0 time
Been thanked: 0 time

Postby peterg » Mon May 08, 2006 9:20 pm

There is nothing where 13 should be....and my one and only sump plug is huge!!! I know because I ordered a standard one and its dwarfed by mine. Went the the Renault garage and checked through all their parts manuals and they only list one plug for the PRV. I believe some cars have some kind of electronic sender where my sump plug is.....whats it for?
User avatar
User

simontaylor

Rank

Non Member

Posts

5602

Joined

Thu Apr 15, 2004 12:33 pm

Location

Fleet, Hampshire


Has thanked: 44 times
Been thanked: 56 times

Postby simontaylor » Mon May 08, 2006 9:31 pm

see page 10.501 of the parts manual.
It says "oil temp" (pictorially) it has 2 wires on it, when this one reaches 60 degs the engine bay fans come on at 6volts. I proved it but putting the 2 wires togetehr a couple of months ago.
Just humour us, lets see a picture of the leading edge of your sump pan...... tomorrow. Perhaps you have a custom sump???
1986 : '86 GTA v6 BW-EFR turbo, with Adaptronic ECU
Firsts at
2007 : Gurston Down & RAOC Champion
2008 : Rushmoor & Eelmoor & ACSMC Hillclimb class Champion
2009 : Longcross & Eelmoor
2010 : Crystal Palace & Eelmoor
2016 : Rushmoor & 5th O/A
User avatar
User

peterg

Rank

Non Member

Posts

2501

Joined

Wed Apr 14, 2004 10:26 pm

Location

Cumbria


Has thanked: 0 time
Been thanked: 0 time

Postby peterg » Tue May 09, 2006 12:20 pm

The GTA is turboless at the minute and my camera is not capable of a shot like this without the car being up on a ramp so youre gonna have to wait! It looks totally standard as far as I can see apart from the things mentioned. I have some kind of oil sender device just above the sump on that side.....although that may be oil pressure.
User avatar
User

stephendell

Rank

Club Member

Club Member
Posts

7463

Joined

Wed Apr 14, 2004 7:25 pm

Location

London


Has thanked: 125 times
Been thanked: 102 times

Postby stephendell » Wed May 10, 2006 8:29 am

Strange :?

Is your sump tin or alloy? There is only one sump listed for the GTA and AFAIK they are all the same.

It it's alloy perhaps yours was damaged at some point and replaced with one off a R30 or Delorean.
PreviousNext


  • Advertisement

Who is online

Users browsing this forum: No registered users and 288 guests

Powered by phpBB ® | Renault' and 'Alpine' are trademarks of Renault S.A.S. or its subsidiaries and are used with kind permission of Renault France