GTA Wishbone/Suspension Bushes

Club Members can advertise items here

Moderators: eastlmark, Test Moderator

User avatar
User

stephendell

Rank

Club Member

Club Member
Posts

7463

Joined

Wed Apr 14, 2004 7:25 pm

Location

London


Has thanked: 125 times
Been thanked: 102 times

GTA Wishbone/Suspension Bushes

Postby stephendell » Sun Jan 27, 2008 1:13 pm

BUSH SUSP ARM GTA
Part number : 6001020701

Still available at the old price from France. £25 per bush delivered to the UK.

If you are quick placing your order Andy may be able to bring some over from France next week.

Please post below with the quantity you require.

Be quick before the price goes up in France too!

You need 8 bushes for the rear lower arms (4 each side) and 4 bushes for the upper rear arms (2 each side)
User avatar
User

mettersl

Rank

Club Member

Club Member
Posts

2027

Joined

Sat Nov 13, 2004 12:46 pm

Location

Saffron Walden- North Essex


Has thanked: 23 times
Been thanked: 59 times

Postby mettersl » Sun Jan 27, 2008 7:18 pm

Hi Stephen,
what the new UK price?
Cheers
Lee
User avatar
User

stephendell

Rank

Club Member

Club Member
Posts

7463

Joined

Wed Apr 14, 2004 7:25 pm

Location

London


Has thanked: 125 times
Been thanked: 102 times

Postby stephendell » Sun Jan 27, 2008 10:09 pm

£100+VAT per bush :shock:
User avatar
User

clee

Rank

Non Member

Posts

10431

Joined

Fri May 28, 2004 11:58 am

Location

Derbyshire


Has thanked: 54 times
Been thanked: 104 times

Postby clee » Mon Jan 28, 2008 5:00 pm

I think I need to prototype some polyurethane units .They can't be that difficult a job can they ?Just need to get the right plastic grade .Plastic over a steel sleeve .I could even have a mould tool made for less than a full set ....................Load the steel inserts and overmould .

Honest thats all they are :lol:
User avatar
User

BIG_MVS

Rank

Club Member

Club Member
Posts

5097

Joined

Wed Jun 30, 2004 9:12 am

Location

Sandbach


Has thanked: 38 times
Been thanked: 72 times

Postby BIG_MVS » Mon Jan 28, 2008 10:54 pm

stephendell wrote:£100+VAT per bush :shock:


Jeez, at least Dick Turpin had the courtesy to wear a mask!!

I paid about £20 per bush with a little bit of discount around November time, when was the sudden increase in price?[/list]
1994 A610 - Montana Red (For Sale)
User avatar
User

si21

Rank

Non Member

Posts

2094

Joined

Mon May 09, 2005 8:24 pm

Location

S.E London


Has thanked: 3 times
Been thanked: 2 times

Robin Barstewards

Postby si21 » Tue Jan 29, 2008 2:36 pm

BIG_MVS wrote:
stephendell wrote:£100+VAT per bush :shock:


Jeez, at least Dick Turpin had the courtesy to wear a mask!!

I paid about £20 per bush with a little bit of discount around November time, when was the sudden increase in price?[/list]


I apaid about the same and that came to about £300 :shock: :roll: :?

si21 :evil:
no avatar
User

neil-gta

Rank

Non Member

Posts

61

Joined

Mon Jan 22, 2007 9:23 pm

Location

Glenrothes, Scotland


Has thanked: 3 times
Been thanked: 0 time

Postby neil-gta » Wed Jan 30, 2008 11:25 pm

Wish I'd checked the forum before today.

Is it too late to ask Andy to order 10? If not then please tell me who Andy is so I can ask him..... sorry I don't post much. :D
no avatar
User

Stuart D

Rank

Non Member

Posts

92

Joined

Sun Jul 18, 2004 10:41 am

Location

Worton, Wilts


Has thanked: 0 time
Been thanked: 0 time

Postby Stuart D » Wed Feb 06, 2008 8:47 pm

clee wrote:I think I need to prototype some polyurethane units .They can't be that difficult a job can they ?Just need to get the right plastic grade .Plastic over a steel sleeve .I could even have a mould tool made for less than a full set ....................Load the steel inserts and overmould .

Honest thats all they are :lol:


Maybe these guys could knock up a batch of rubber ones. Does anybody know the DIMs?
http://www.antivibrationmethodsrubber.c ... sh.html#BB

See bottom of page re poly bushes.
User avatar
User

stephendell

Rank

Club Member

Club Member
Posts

7463

Joined

Wed Apr 14, 2004 7:25 pm

Location

London


Has thanked: 125 times
Been thanked: 102 times

Postby stephendell » Thu May 21, 2009 3:32 am

UK price is now £112.45 + VAT per bush = £129.32

RAOC Price = £40 per bush non-members. £30 per bush members.
Trafic, Twingo GT, Vel Satis Turbo x 2, Clio V6 Proto Ph2, Vel Satis 3.5, Avantime, Alpine A610, GTA Atmo x 3, GTA Turbo x 3, R5 Gordini Turbo Mid Engine, Alpine A310 4cyl, Alpine A110, Yellow Smart
User avatar
User

NickWW

Rank

Non Member

Posts

20

Joined

Thu Sep 05, 2013 12:22 am


Has thanked: 5 times
Been thanked: 0 time

Re: GTA Wishbone/Suspension Bushes

Postby NickWW » Fri Apr 25, 2014 12:04 pm

Hi Stephen

I'm looking for an off-side door lock solanoid if you have one please?

Cheers
Nick 07572720066
User avatar
User

simonsays74

Rank

Non Member

Posts

1296

Joined

Thu Apr 15, 2004 10:12 pm

Location

Belfast (££££ Zone!!)


Has thanked: 0 time
Been thanked: 0 time

Re: GTA Wishbone/Suspension Bushes

Postby simonsays74 » Wed May 07, 2014 7:52 pm

Renault have solenoids for about £30


  • Advertisement

Who is online

Users browsing this forum: Google [Bot] and 49 guests

Powered by phpBB ® | Renault' and 'Alpine' are trademarks of Renault S.A.S. or its subsidiaries and are used with kind permission of Renault France