AZEV Wheels

Gents,
On a business trip to Germany managed to getr time to visit the AZEV factory to find out what is going on and have bad news for all us Alpine lovers. Azev stated that they will no longer be making 17" or 18" wheels for either front or rear fitment. When pushed they stated that the only wheels they would have available would be 16" ones for the GTA 4 x hole.
I then asked them if I could get a batch order would they do me a special order and they stated no.
So looks like 'we is all outta luck'. I only need one front and rear 17" to finish off the repaired car. Looks like I'll have to buy a complete set of another manufacturer.
Mr Dell as the only thing available was the 16" I didnt even bother getting more info. Perhaps it might be interesting to see if you could buy the moulds for the 17" & 18" for the club and we can then control the re-manufacture of the wheels.
Anyone else got some other suggestions that might prove useful?????
Regards
StephenB

we get team dynamics wheels for GTA and spider A610 and GTA europa cup theses days 17" for spider and 16,17 or 18" for the GTA 17/18" for A610 and 17" for europa cup

[BIG_MVS]

Didn't someone (with a GTA) stumble on the Azev's years ago by fitting a set made for a BMW 3 Series E30? Would have been for a kitted one I would have thought so the offset was pretty near to fit the GTA....

Maybe we can say they are for Das BMW ya! Thus getting a set that way

Dont BBS do wheels that will fit? I would like to know as I would like to put some on my A610 when I get one.

Dont BBS do wheels that will fit? I would like to know as I would like to put some on my A610 when I get one.

....but at BBS Prices

cost of 1 set of alloys = 1 GTA nice alloys though.

si21

My Compomotive MO's fit perfectly......

Got any pic's of the Compomotive MO's on your GTA jon???

Here you go, sorry it's taken so long!






I'll get the offsets on Thursday

Does that mean you are up and running again Jon?

I wish!! Gonna try this TDC when it arrives hopefully on Thursday but then there's still the final install of the Turbo and setting it all up. Then an MOT to negotiate after sitting for almost 6 months. Still hopefully we'll get there soon....

[BIG_MVS]

StephenB - Have you got a contact at Azev? Will they do 2 x rear Azev C's in 5 * 108 fitment 17 inch?

StephenB - Have you got a contact at Azev? Will they do 2 x rear Azev C's in 5 * 108 fitment 17 inch?

for your A610 then isn't it heavy enough so you're adding some extra unsprung ballast

My experience is that AZEV is heavy too, about 5kg per corner, but I am 2 inches bigger in diameter and width.

but I am 2 inches bigger in diameter and width.

But the rubber all seems to weigh about the same.