Shiny Wheels

It took a while ,but I've finally got my wheels on

They look great Chris.

Is the valve behind the spoke?

Looks like you have a similar rear brake set up that I fitted to the hillclimb car.

Yes valve behind the spoke and yes similar set up using a seperate handbrake caliper .
I noticed I had my hb caliper behind the main caliper yours is in front.

wow they're proper shiney

Mr D will be very jealous

They look great Chris - similar to an old Azev style I had on my car years ago. My be tempted into a set if you can get them in the UK. Are they the correct offset? And what company makes them?

I made the centers myself Tony , after hours at work so unfortunately they will be a one off only .

Front 17x7 et +35
Rear 17x9 et +5


You have an interesting collection of cars Tony do you recognise the brake calipers.

The 6061 aluminium started off 440mm x440mm x 65 thick
Here are some pics

They look very good bud.

Made them yourself I hate you . Are the brake calipers Skyline?

Yes they are skyline but very modified ,they used to have NISSAN embossed on the outside.

Nissan brake pads are a hole lot cheaper than AP or Brembo and the initial purchase of the second hand caliper ,much less than new calipers
but I had to do a lot of modification.
As you will see in these pics.

What size disks are you now using?
Same front and back?
And how much better are the brakes overall?

disk size is dia 296 mm x 28mm thick front and rear