Tyres

Renault & Alpine General Discussion

Moderators: eastlmark, BIG_MVS, phildini, Test Moderator, Alpineandy

no avatar
User

bingham

Rank

Non Member

Posts

18

Joined

Fri Feb 04, 2005 5:50 pm

Location

That London


Has thanked: 0 time
Been thanked: 0 time

Tyres

Postby bingham » Sat May 07, 2005 7:28 am

Anybody spotted the tyres on the new caterham 7. 245/40 15 rears and 195/45 15 fronts. They are Avon CR500s......
User avatar
User

peterg

Rank

Non Member

Posts

2501

Joined

Wed Apr 14, 2004 10:26 pm

Location

Cumbria


Has thanked: 0 time
Been thanked: 0 time

Postby peterg » Sat May 07, 2005 8:07 am

Caterham have used Avon CR500s for a while now....in fact Avon use the Caterham as an advert in magazines to show how good their tyres are. Had a set on my race car a couple of years back.....they are excellent tyres. Sadly they cost a fortune and they are on the wrong list in the motorsport year book so I cant run them on the Alpine.
no avatar
User

bingham

Rank

Non Member

Posts

18

Joined

Fri Feb 04, 2005 5:50 pm

Location

That London


Has thanked: 0 time
Been thanked: 0 time

Postby bingham » Sat May 07, 2005 8:31 am

They wre 13 inch. The CSR has 15 inch wheels,its a new size for CR500s.I know they're not blue book for road cars but top trackday tyre and still cheaper than OE Michelins
User avatar
User

David Gentleman

Rank

Non Member

Posts

3474

Joined

Thu Apr 15, 2004 8:10 am

Location

Colchester, Essex


Has thanked: 0 time
Been thanked: 0 time

Postby David Gentleman » Sat May 07, 2005 9:09 am

..but 245-40-15 is way too small for a GTA.... :cry:
Image
User avatar
User

LiamMcShane

Rank

Non Member

Posts

512

Joined

Fri Oct 01, 2004 12:39 pm

Location

Shenzhen, China


Has thanked: 1 time
Been thanked: 0 time

Postby LiamMcShane » Sat May 07, 2005 2:03 pm

David Gentleman wrote:..but 245-40-15 is way too small for a GTA.... :cry:


But it would be geared better for acceleration (60 in under 5 anyone?)! :shock:
I use lower profile tyres on the original rims on my XR2i for short circuit racing and it's defo much quicker off the line.

Clee, what about trying that in the comp?
'88 GTA V6 Turbo

http://www.perfect-display.com.cn
Perfect Display Technology Company Ltd, Shenzhen
User avatar
User

LiamMcShane

Rank

Non Member

Posts

512

Joined

Fri Oct 01, 2004 12:39 pm

Location

Shenzhen, China


Has thanked: 1 time
Been thanked: 0 time

Postby LiamMcShane » Sat May 07, 2005 2:04 pm

It wouldn't make the rear hit the ground or anything, would it? :?:
'88 GTA V6 Turbo

http://www.perfect-display.com.cn
Perfect Display Technology Company Ltd, Shenzhen
no avatar
User

bingham

Rank

Non Member

Posts

18

Joined

Fri Feb 04, 2005 5:50 pm

Location

That London


Has thanked: 0 time
Been thanked: 0 time

Postby bingham » Sat May 07, 2005 2:26 pm

Rolling radius only is 11.5mm less than 45 section and circumerfence about 4% less, i.e. less of a difference than going from 245/45 15 to 245/40 17s
User avatar
User

David Gentleman

Rank

Non Member

Posts

3474

Joined

Thu Apr 15, 2004 8:10 am

Location

Colchester, Essex


Has thanked: 0 time
Been thanked: 0 time

Postby David Gentleman » Sat May 07, 2005 3:42 pm

I make it more than that. if you stood the 255-45-15 next to the 245-40-15, it would be 33.5mm more in overall height..

255/100 x 45 = 114.75mm sidewall
245/100 x 40 = 98.00mm sidewall


:)
Image
no avatar
User

bingham

Rank

Non Member

Posts

18

Joined

Fri Feb 04, 2005 5:50 pm

Location

That London


Has thanked: 0 time
Been thanked: 0 time

Postby bingham » Sat May 07, 2005 4:18 pm

You're right. I worked out 245/45 v 245/40 not 255/45 v 245/40
User avatar
User

LiamMcShane

Rank

Non Member

Posts

512

Joined

Fri Oct 01, 2004 12:39 pm

Location

Shenzhen, China


Has thanked: 1 time
Been thanked: 0 time

Postby LiamMcShane » Sun May 08, 2005 11:14 am

But would that make it hit the ground if you're running standard suspension?
'88 GTA V6 Turbo

http://www.perfect-display.com.cn
Perfect Display Technology Company Ltd, Shenzhen
User avatar
User

simontaylor

Rank

Non Member

Posts

5602

Joined

Thu Apr 15, 2004 12:33 pm

Location

Fleet, Hampshire


Has thanked: 44 times
Been thanked: 56 times

Postby simontaylor » Sun May 08, 2005 11:22 am

Liam, if the sidewall is reduced by 16.75mm, then the rear of the car will be lowered by the same amount, well less than 1 inch, so I'd guess it will be ok.
1986 : '86 GTA v6 BW-EFR turbo, with Adaptronic ECU
Firsts at
2007 : Gurston Down & RAOC Champion
2008 : Rushmoor & Eelmoor & ACSMC Hillclimb class Champion
2009 : Longcross & Eelmoor
2010 : Crystal Palace & Eelmoor
2016 : Rushmoor & 5th O/A
User avatar
User

David Gentleman

Rank

Non Member

Posts

3474

Joined

Thu Apr 15, 2004 8:10 am

Location

Colchester, Essex


Has thanked: 0 time
Been thanked: 0 time

Postby David Gentleman » Sun May 08, 2005 11:47 am

..problem is though, is, that sized rear tyre is only 0.5mm smaller in diameter than the front tyres...it would look a bit silly!
Image
User avatar
User

Tony Smith

Rank

Non Member

Posts

1407

Joined

Fri Apr 16, 2004 4:50 pm

Location

Kent


Has thanked: 0 time
Been thanked: 19 times

Small wheels

Postby Tony Smith » Mon May 09, 2005 4:01 pm

In my experience putting lower profile tyres on the standard wheels on any car does the following things, makes it accelerate better (driven wheels only obviously, lowers it - sometimes this looks ok sometimes not, ruins the ride comfort, and often makes the car horrible to drive due to the change in suspension angles and camber etc. I think a GTA would look ridiculous on smaller rear wheels as the standard wheels are a bit lost in the arches anyway and it would also exacerbate the GTA's slightly nose upward stance
Alpines - GTA 3.0 Turbo, GTA 3.0 Inj (Project DD), GTA 6.2 V8 (500 bhp) , R32 Skyline GTR, BMW Alpina B10 635 Highline, Alpina B10 E39 5 Series, Jaguar 4.2 XKR, Laguna 205GT, BMW 120d.
User avatar
User

peterg

Rank

Non Member

Posts

2501

Joined

Wed Apr 14, 2004 10:26 pm

Location

Cumbria


Has thanked: 0 time
Been thanked: 0 time

Postby peterg » Mon May 09, 2005 4:05 pm

I'm with Tony.....rubberband profile tyres like these would make a GTA on standard wheels look horrible. Theres' be less filling the arches and would exagerate the bland design of the wheels. Yes it would improve acceleration but not so that you would notice without an accurate measure.


  • Advertisement

Who is online

Users browsing this forum: No registered users and 213 guests

Powered by phpBB ® | Renault' and 'Alpine' are trademarks of Renault S.A.S. or its subsidiaries and are used with kind permission of Renault France