Oil sprays - but couldn't we do with a Parts section?

Renault & Alpine General Discussion
no avatar
User

MFaulks

Rank

Non Member

Posts

1552

Joined

Sun Sep 28, 2008 4:25 pm


Has thanked: 45 times
Been thanked: 26 times

Oil sprays - but couldn't we do with a Parts section?

Postby MFaulks » Sun Jan 01, 2012 12:52 pm

I'm looking for either a Safrane engine block with oil sprays, or better still part numbers for the oil sprays (and block if known exactly) if anybody can find the part number for me that would be great?

New project and some decisions need to be made 8)

But in general with all these new moderators and head chickens... wouldn't a dedicated parts knowledge section, not just thread be useful, as we could then break out into sections like most other forums. Currently we have here, or Sales and Wanted, a bit broad I think… structure, we need structure as an old boss would say :-)

Oh whilst I think of it, can we have a list of the threads that have been deleted by the Mods, so we know what has gone - transparency?

Thanks,
Martin
... A diamond is only a piece of coal that did well under pressure... PRV afflicted, may be I need to squeeze harder!!!!

https://www.facebook.com/maftecfaulks
User avatar
User

RED21

Rank

Non Member

Posts

371

Joined

Wed Jan 19, 2005 11:43 pm

Location

New Forest


Has thanked: 1 time
Been thanked: 4 times

Postby RED21 » Sun Jan 01, 2012 5:05 pm

6 or 4 pot Safrane engine?
no avatar
User

Alpineandy

Rank

Club Member

Club Member
Posts

2381

Joined

Mon Jun 14, 2004 8:37 am

Location

North Essex


Has thanked: 5 times
Been thanked: 10 times

Postby Alpineandy » Sun Jan 01, 2012 7:20 pm

RED21 wrote:6 or 4 pot Safrane engine?

Shouldn't that say, 4,5 or 6 pot?

I'm guessing 6!
Alpine A110, Renault Safrane 2.5dt, Hudson Kindred Spirit (Renault powered), transAlp (Honda) and Ducati Multistrada
User avatar
User

RED21

Rank

Non Member

Posts

371

Joined

Wed Jan 19, 2005 11:43 pm

Location

New Forest


Has thanked: 1 time
Been thanked: 4 times

Postby RED21 » Mon Jan 02, 2012 1:58 am

I can not find any referance to oil jets in a N7Q/ N7U engines or any V6, so can I conclued that it's a 4 cylinder petrol/diesel????

J7R
J7T
J8S
G8T
G9T
G9U
User avatar
User

stephendell

Rank

Club Member

Club Member
Posts

7463

Joined

Wed Apr 14, 2004 7:25 pm

Location

London


Has thanked: 125 times
Been thanked: 102 times

Postby stephendell » Mon Jan 02, 2012 2:59 am

It'll be a V6. safrane or laguna apparently has piston oil sprays but can never remember which so presume safrane from this thread
Trafic, Twingo GT, Vel Satis Turbo x 2, Clio V6 Proto Ph2, Vel Satis 3.5, Avantime, Alpine A610, GTA Atmo x 3, GTA Turbo x 3, R5 Gordini Turbo Mid Engine, Alpine A310 4cyl, Alpine A110, Yellow Smart
User avatar
User

mettersl

Rank

Club Member

Club Member
Posts

2027

Joined

Sat Nov 13, 2004 12:46 pm

Location

Saffron Walden- North Essex


Has thanked: 23 times
Been thanked: 59 times

Postby mettersl » Mon Jan 02, 2012 8:09 am

I have a Laguna engine that Martin ( stunned monkey) sold me and told me it had the oil sprays.
I haven't had it apart, but on the basis of Martins information I would have said Laguna engines.
Martin can you confirm?
Lee
no avatar
User

MFaulks

Rank

Non Member

Posts

1552

Joined

Sun Sep 28, 2008 4:25 pm


Has thanked: 45 times
Been thanked: 26 times

Postby MFaulks » Mon Jan 02, 2012 1:35 pm

Thanks chaps for the replies, but yes the V6 PRV.

At the least I’m looking for the part number for the spray insert in the block, they fit in the inside top of the V.

I wouldn’t also say no to buying a block (even bare with no caps if need be…) with them fitted either if anybody defo has one…

Well I've had a few Laguna blocks and none of them had the sprays, but with everything on these engines if you have been around enough of them to have a few side-by-side a bit pot luck which side of the box of chocolates they came, so I don't think there are any guarantees there unless you physically check.

The block I had with them fitted was a 24v...
... A diamond is only a piece of coal that did well under pressure... PRV afflicted, may be I need to squeeze harder!!!!

https://www.facebook.com/maftecfaulks
User avatar
User

RED21

Rank

Non Member

Posts

371

Joined

Wed Jan 19, 2005 11:43 pm

Location

New Forest


Has thanked: 1 time
Been thanked: 4 times

Postby RED21 » Mon Jan 02, 2012 3:13 pm

I have look through the Renault engine repair manual for the PRV "Z" and parts slides & I can not find any oil jets, the same goes for the "L" series V6.
Wasn't the 24V PRV only fitted to Cit XM or Pug coupe??
User avatar
User

clee

Rank

Non Member

Posts

10431

Joined

Fri May 28, 2004 11:58 am

Location

Derbyshire


Has thanked: 54 times
Been thanked: 104 times

Postby clee » Mon Jan 02, 2012 5:16 pm

Thought there might be a clue here but no luck ....

http://www.renaultalpineownersclub.com/ ... 0-00_6.pdf
no avatar
User

MFaulks

Rank

Non Member

Posts

1552

Joined

Sun Sep 28, 2008 4:25 pm


Has thanked: 45 times
Been thanked: 26 times

Postby MFaulks » Mon Jan 02, 2012 5:42 pm

Thanks Rich. Yes Citroen and Pug, I will check engine code tonight and PM :wink:

But that's interesting if you can't find them on the parts list at all, because the theory the Renault engines ever had them, which gets quoted quite a lot seems to be thin on air then??
Last edited by MFaulks on Mon Jan 02, 2012 11:52 pm, edited 1 time in total.
... A diamond is only a piece of coal that did well under pressure... PRV afflicted, may be I need to squeeze harder!!!!

https://www.facebook.com/maftecfaulks
User avatar
User

clee

Rank

Non Member

Posts

10431

Joined

Fri May 28, 2004 11:58 am

Location

Derbyshire


Has thanked: 54 times
Been thanked: 104 times

Postby clee » Mon Jan 02, 2012 5:50 pm

LeeM !

Pull ya finger out and get stripping :wink:
User avatar
User

mettersl

Rank

Club Member

Club Member
Posts

2027

Joined

Sat Nov 13, 2004 12:46 pm

Location

Saffron Walden- North Essex


Has thanked: 23 times
Been thanked: 59 times

Postby mettersl » Mon Jan 02, 2012 7:36 pm

What dismantle my lovely garage ornament!!

Could you see the sprays from the underside? If so I might be tempted to take the sump off and have a look. Its on a stand anyway...
no avatar
User

MFaulks

Rank

Non Member

Posts

1552

Joined

Sun Sep 28, 2008 4:25 pm


Has thanked: 45 times
Been thanked: 26 times

Postby MFaulks » Tue Jan 03, 2012 12:02 am

No you can't I doubt, you can only really tell when the pistons are out.. Only other way is a flexible bore scope, get past the crank, and look back from the piston side down towards the block :-). They sit just at the base of the liner, on a ledge of the casting obscured from the crank side.

So it really is a take it apart to find out job .... and then, wait for it... nope I haven't got them, and I've got my garage floor covered in cr ap again! Hahahaha+

What engine code have you got, and do you know the actual origin i.e. type of car etc it was from?
... A diamond is only a piece of coal that did well under pressure... PRV afflicted, may be I need to squeeze harder!!!!

https://www.facebook.com/maftecfaulks
User avatar
User

stephendell

Rank

Club Member

Club Member
Posts

7463

Joined

Wed Apr 14, 2004 7:25 pm

Location

London


Has thanked: 125 times
Been thanked: 102 times

Postby stephendell » Tue Jan 03, 2012 12:10 am

Seeing as stunned monkey is the only source of info re oil sprays in laguna/safrane lump and he also had a 24V block a la mfaulks maybe he made a mistake and only the 24V has the oil spray?

Mr monkey any comments?
Trafic, Twingo GT, Vel Satis Turbo x 2, Clio V6 Proto Ph2, Vel Satis 3.5, Avantime, Alpine A610, GTA Atmo x 3, GTA Turbo x 3, R5 Gordini Turbo Mid Engine, Alpine A310 4cyl, Alpine A110, Yellow Smart
no avatar
User

MFaulks

Rank

Non Member

Posts

1552

Joined

Sun Sep 28, 2008 4:25 pm


Has thanked: 45 times
Been thanked: 26 times

Postby MFaulks » Tue Jan 03, 2012 7:50 pm

Well from Stunned previous post if you go hunting about:
Laguna Z7X-R-xxx serieseseses
... A diamond is only a piece of coal that did well under pressure... PRV afflicted, may be I need to squeeze harder!!!!

https://www.facebook.com/maftecfaulks
Next


  • Advertisement

Who is online

Users browsing this forum: No registered users and 200 guests

Powered by phpBB ® | Renault' and 'Alpine' are trademarks of Renault S.A.S. or its subsidiaries and are used with kind permission of Renault France