BIG Engine

Renault & Alpine General Discussion

Moderators: eastlmark, BIG_MVS, phildini, Test Moderator, Alpineandy

no avatar
User

Alpineandy

Rank

Club Member

Club Member
Posts

2381

Joined

Mon Jun 14, 2004 8:37 am

Location

North Essex


Has thanked: 5 times
Been thanked: 10 times

BIG Engine

Postby Alpineandy » Thu Jul 07, 2005 1:50 pm

What's the biggest capacity for an atmo car?
Bearing in mind it would be for a GTA or an A310, what bits would/could be used from pugs, volvos and renaults etc.
I think volvo did a 3 litre PRV but don't know if it was bore or stroke or both.
If it was stroke would the crank be a straight swap etc etc etc


:?:
Alpine A110, Renault Safrane 2.5dt, Hudson Kindred Spirit (Renault powered), transAlp (Honda) and Ducati Multistrada
no avatar
User

rupert

Rank

Non Member

Posts

1323

Joined

Mon Apr 19, 2004 7:39 pm

Location

Plymouth, Devon


Has thanked: 2 times
Been thanked: 9 times

Postby rupert » Thu Jul 07, 2005 5:51 pm

... straight swap...
In principle yes, but we are having all kinds of problems getting the citroen 24v to fit in ... the bellhousing has had to be cut, rewelded and re drilled, only two holes matched up, the clutch spigot is completely different, Engine mounts, alternator position... it goes on and on.
BUT we are getting there, almost ready to go into the car. :)
User avatar
User

David Gentleman

Rank

Non Member

Posts

3474

Joined

Thu Apr 15, 2004 8:10 am

Location

Colchester, Essex


Has thanked: 0 time
Been thanked: 0 time

Postby David Gentleman » Thu Jul 07, 2005 5:56 pm

If you use the Z7X pistons/liners (crank is the same as GTA atmo in stroke - but even fire) then you will have 2975cc. I do a Ferry forged crank which brings it up to 3.2L, and also some forged liners with bigger pistons to a maximum of 3.4L. This has been used in a Twingo grass track car.
Image
no avatar
User

Alpineandy

Rank

Club Member

Club Member
Posts

2381

Joined

Mon Jun 14, 2004 8:37 am

Location

North Essex


Has thanked: 5 times
Been thanked: 10 times

Postby Alpineandy » Thu Jul 07, 2005 5:56 pm

No, I mean that 'If you have to totally rebuild the original engine, Would a Pug Crank and Volvo Piston/liners (or whatever) be a straight replacement and give a 5.7 litre (or whatever...) motor'.
Alpine A110, Renault Safrane 2.5dt, Hudson Kindred Spirit (Renault powered), transAlp (Honda) and Ducati Multistrada
User avatar
User

David Gentleman

Rank

Non Member

Posts

3474

Joined

Thu Apr 15, 2004 8:10 am

Location

Colchester, Essex


Has thanked: 0 time
Been thanked: 0 time

Postby David Gentleman » Thu Jul 07, 2005 6:07 pm

Maximum capacity with standard parts is 2975cc, but if you fitted 93mm liners/pistons you would also need new headgaskets, heads machining.

Simpler to do a whole engine swap. :D
Image
no avatar
User

Alpineandy

Rank

Club Member

Club Member
Posts

2381

Joined

Mon Jun 14, 2004 8:37 am

Location

North Essex


Has thanked: 5 times
Been thanked: 10 times

Postby Alpineandy » Thu Jul 07, 2005 6:08 pm

Hi DG, I was replying to rupert but you got in between...

So GTA pistons and Liners are the biggest standard option.

Are all the cranks the same thro then?
Alpine A110, Renault Safrane 2.5dt, Hudson Kindred Spirit (Renault powered), transAlp (Honda) and Ducati Multistrada
no avatar
User

Alpineandy

Rank

Club Member

Club Member
Posts

2381

Joined

Mon Jun 14, 2004 8:37 am

Location

North Essex


Has thanked: 5 times
Been thanked: 10 times

Postby Alpineandy » Thu Jul 07, 2005 6:09 pm

Alpineandy wrote:Hi DG, I was replying to rupert but you got in

and again.. :lol:
Alpine A110, Renault Safrane 2.5dt, Hudson Kindred Spirit (Renault powered), transAlp (Honda) and Ducati Multistrada
User avatar
User

David Gentleman

Rank

Non Member

Posts

3474

Joined

Thu Apr 15, 2004 8:10 am

Location

Colchester, Essex


Has thanked: 0 time
Been thanked: 0 time

Postby David Gentleman » Thu Jul 07, 2005 6:11 pm

Not quite. GTA is 91mm bore x 73mm stroke (2849cc). The longest throw original cranks are all 73mm but you can use Z7X pistons/liners which are 93mm bore, thus making the 2975 cc, against the GTA 2849cc.

Only difference between cranks is the odd fire and even fire combination.

Lot of work for not much gain in capacity.
Image
no avatar
User

Alpineandy

Rank

Club Member

Club Member
Posts

2381

Joined

Mon Jun 14, 2004 8:37 am

Location

North Essex


Has thanked: 5 times
Been thanked: 10 times

Postby Alpineandy » Fri Jul 08, 2005 12:35 pm

David Gentleman wrote:Lot of work for not much gain in capacity.


Yes.


I guess the long throw crank you've got is v v expensive.
Alpine A110, Renault Safrane 2.5dt, Hudson Kindred Spirit (Renault powered), transAlp (Honda) and Ducati Multistrada
User avatar
User

David Gentleman

Rank

Non Member

Posts

3474

Joined

Thu Apr 15, 2004 8:10 am

Location

Colchester, Essex


Has thanked: 0 time
Been thanked: 0 time

Postby David Gentleman » Mon Jul 11, 2005 9:35 am

£3500!....tis forged though.... :oops:
Image
no avatar
User

Alpineandy

Rank

Club Member

Club Member
Posts

2381

Joined

Mon Jun 14, 2004 8:37 am

Location

North Essex


Has thanked: 5 times
Been thanked: 10 times

Postby Alpineandy » Mon Jul 11, 2005 4:42 pm

wow, where's the fainting icon...
Alpine A110, Renault Safrane 2.5dt, Hudson Kindred Spirit (Renault powered), transAlp (Honda) and Ducati Multistrada


  • Advertisement

Who is online

Users browsing this forum: No registered users and 216 guests

Powered by phpBB ® | Renault' and 'Alpine' are trademarks of Renault S.A.S. or its subsidiaries and are used with kind permission of Renault France