Looking for spare wheel for A310 ph2

Dear friends
My car has not the spare wheel, do you have idea where can I buy one of it?
Thanks

[BIG_MVS]

I have a spare wheel from a GTA available if it fits the 310? It's 4 stud which I believe the Ph2 A310 was as well.

The PCD of the GTA spare wheel is 4 x 100.

please give me a dimensions of spare wheel you have

[Alpineandy]

I believe you are in Italy.
So the post/mail cost from the UK would be very expensive.
I would suggest you ask the same question to the Italia Alpine clubs.
If they do not have one available then try Southern Germany or Austrian Clubs etc.

[BIG_MVS]

Hi,

It's 15" and diameter including the tyre is 54 cm.

IMG_20160912_124313730.jpg

I would like £25 for the wheel and £15 shipping (not too bad Andy eh?) to Italy so £40 in total. Let me know if you want it or not?

Thanks,

Martin

A310 4x98 studs
GTA 4X100 bolts

You could drill the holes in the wheel out slightly and it will fit OK .Located on hub so will be fine .

I measured my tyres and they are 58cm
if you tell me that for GTA it is the
For me it is ok
please let me know

I measured my tyres and they are 58cm
if you tell me that for GTA it is the same
For me it is ok
please let me know[/quote]

[BIG_MVS]

What size wheels have you got? Are they 16"?

Size of rear ones is 225/50 R15, almost standard I think
the standard is 220/55 R15 very similar

hereafter
...

58cm.jpg

[BIG_MVS]

Re measured before drinking too much wine and it's in fact 56 cm high.

Should be OK to get you home after a puncture I guess.