Removal of front shock

Renault & Alpine General Discussion

Moderators: eastlmark, BIG_MVS, phildini, Test Moderator, Alpineandy

no avatar
User

JanThyregod

Rank

Non Member

Posts

16

Joined

Tue Apr 10, 2018 9:24 am


Has thanked: 6 times
Been thanked: 0 time

Removal of front shock

Postby JanThyregod » Wed May 16, 2018 11:58 am

Hi

I need to remove the right front shock on my 1981 A310 due to a clonking sound. The top bush on my SPAX sahock moves and "clonks".

The bolts are different from the new ones I got som simon.de and very hard to access. Socket is too large. Fixed spanners move too little and no room for the more moders racthet spanners (sorry if proper english term is different).

Is this a cas eof the 3rd french elbow ? Any help or advise would be appreciated. (except for removing entire body)

Best regards

Jan
2015 Clio IV & 1981 A310 V6
User avatar
User

johnb

Rank

Non Member

Posts

858

Joined

Wed Sep 13, 2006 6:57 pm

Location

Cheshire


Has thanked: 13 times
Been thanked: 25 times

Re: Removal of front shock

Postby johnb » Wed May 16, 2018 5:59 pm

I changed the front shock absorbers a few years ago and agree that access is limited. My car is a Phase 1, your 1981 car might be Phase 2 (4 stud wheels). If so, they could be different.

I can't remember exactly the tools I used but I've just had a look at the car and taken this photo of the driver's side. I think I used a socket wrench on the bolt head, as shown in the photo, with a ring spanner on the nut. Most of the tightening, if not all, would have been with the wrench as there is more space for the socket and wrench at this side. I couldn't get a socket and wrench on the nut due to insufficient space.

When tightening with the wrench, the wrench handle hits the circular spring pan, restricting rotation of the wrench. To overcome this you may have to remove the wrench with the socket in place and rotate the socket one click to take out some of the play in the ratchet. Then reattach the socket to the bolt head.
If you persevere you should be able to do it.
You do not have the required permissions to view the files attached to this post.
1970 A110V85 and 1980 A310V6.
no avatar
User

JanThyregod

Rank

Non Member

Posts

16

Joined

Tue Apr 10, 2018 9:24 am


Has thanked: 6 times
Been thanked: 0 time

Re: Removal of front shock

Postby JanThyregod » Wed May 16, 2018 8:04 pm

Thanks John..Great image I now clearly see that my bolts are reversed and quite different. Your socket is smaller than mine.

As I suspect the bolt mybe too small since the damper bush is able to move up and down. New bolts and bushes ordered at Simon as well as all the other bushes, rubber mould and ball joint. If I need to strip the entire suspendion I might as well do it properly first time.

Space is exactly same so I will just go for it and be more patient....very patient

Thanks for the help. Appreciate it :up
2015 Clio IV & 1981 A310 V6


  • Advertisement

Who is online

Users browsing this forum: vantage11 and 212 guests

Powered by phpBB ® | Renault' and 'Alpine' are trademarks of Renault S.A.S. or its subsidiaries and are used with kind permission of Renault France